DIBACHEMColor and additive expertise for polymersContact us
DIBACHEM / APPLICATIONS

PET preforms

Colour discussions for PET preforms that consider clarity, processing and the appearance of the final bottle.

The colour seen in a PET preform can change in appearance when the material is stretched into a bottle. Wall thickness and the viewing conditions are different, so it is useful to evaluate both stages when setting the colour target.

Share the PET grade, preform design and intended bottle with Dibachem. Carrier suitability, drying and processing conditions belong in the same discussion as colour and clarity. The aim of a sample trial is to assess the proposed material through the route used for the actual finished package.

Evaluate the preform and bottle

Include a representative preform and, where available, the bottle produced from it. Compare the colour on the surfaces and wall sections used for approval. For transparent packaging, discuss clarity and visible haze alongside the shade rather than considering colour in isolation.

Document the PET processing route

Identify the resin and recycled content if used, together with material-handling, drying and processing conditions. Use the proposed grade's instructions when planning the trial. Record appearance and running observations at the preform stage and after the later bottle-forming step.

Bring the packaging specification

The intended contents and market can introduce specific documentation and approval requirements. Identify these early so the actual proposed grade can be reviewed against the intended application. Keep the accepted preform and bottle samples together with the material and trial record.

A practical trial checklist

  • PET grade and carrier suitability
  • Drying, handling and processing conditions
  • Colour, clarity and haze on the final bottle
  • Application-specific documents and approval tests

Let’s discuss your application

Send the PET grade, preform weight or drawing, bottle sample or design and colour reference. Explain the intended use and destination, and include any clarity, documentation or approval requirements that the material must be evaluated against.

Send your requirements

Tell us what your production line needs.

Share the polymer, process and result you need. We can discuss the next technical steps.