DIBACHEMColor and additive expertise for polymersContact us
DIBACHEM / APPLICATIONS

Polymer film

Colour and additive selection for blown or cast film, with thickness, handling and conversion in view.

A film is judged through its appearance, handling and performance in the next converting step. Thickness, layer structure and the base resin all influence what should be evaluated. Colour and opacity on a thin film can look quite different from a thick sample plaque.

For blown and cast film discussions, share the actual resin and film specification with Dibachem. Bring the colour or functional target together with the way the film is wound, stored, printed, sealed or otherwise converted, so the proposed material can be assessed in context.

Use the intended film gauge

Compare colour, opacity and surface quality at the thickness and layer arrangement you intend to produce. Keep the viewing background consistent and record the addition rate. For a multilayer film, explain which layer carries the concentrate and the requirements of the full structure.

Check handling at the right time

Slip and antiblock address different aspects of film handling. Where these functions are part of the brief, include winding and separation observations and use the agreed test timing. Some handling behaviour changes after production, making the storage period and later converting conditions relevant to the trial.

Review the finished application

Include the required mechanical, optical and surface checks rather than approving colour alone. If the film needs particular end-use documentation, identify that requirement before the trial. Keep the current formulation as a baseline so any change in the proposed sample can be discussed clearly.

A practical trial checklist

  • Resin, process, gauge and layer structure
  • Colour, opacity and visible surface quality
  • Winding, separation and agreed handling tests
  • Printing, sealing and end-use requirements

Let’s discuss your application

Tell us whether the film is blown or cast, its resin and thickness, the colour target and how it will be converted. Include any current handling observations, the test timing and a sample from the intended application.

Send your requirements

Tell us what your production line needs.

Share the polymer, process and result you need. We can discuss the next technical steps.