Calcium carbonate filler masterbatch introduces a mineral filler through a polymer carrier. Its suitability depends on the resin, the way the material is processed and the balance of properties needed in the finished article. Film, a moulded component and a corrugated sheet each present a different set of priorities.
A useful discussion looks at the whole product. Stiffness, density, appearance, surface quality and mechanical requirements may all matter. Share these priorities with Dibachem so that a proposed filler grade and addition rate can be assessed through a representative production trial.
Assess the finished product
Compare samples at the intended geometry and thickness. Review the properties that the customer or next production step depends on, rather than judging a plaque on appearance alone. Where weight or material use is important, compare the actual part or sheet together with the required performance.
Watch the processing balance
Include mixing, feeding, dispersion and surface observations in the trial. Film producers may also need to review the effect on optical and mechanical properties. For mouldings and sheets, note dimensional behaviour, visible defects and how the product handles in its later assembly or conversion steps.
Make changes in a controlled way
Record a baseline with the current material and then compare the proposed formulation under agreed conditions. Keep the addition rate and other process changes traceable. This makes it easier to decide whether the result meets the product specification and whether another adjustment should be explored.
A practical trial checklist
- Resin and carrier suitability
- Thickness, density and stiffness requirements
- Surface quality and mechanical acceptance checks
- Feeding, dispersion and agreed addition rate
Let’s discuss your application
Tell us the resin, process, thickness or part dimensions, current formulation if you can share it, and the properties that must be retained. A sample of the finished article is a useful basis for deciding what to evaluate.
Send your requirements